TC1018+2TRA Needle Roller Thrust Bearings with Washers 5/8"x1-1/8"x5/64" 2pcs

Description:

1. This Needle Roller Thrust Bearings provide a high degree of stiffness within a minimum axial space. It has a smaller cross-section than a standard thrust bearing for use in restricted spaces.
2. These bearings to accommodate heavy axial loads and peak loads due to small diameter deviation of the rollers within one assembly.
3. Thrust Bearings can be combined with washers in applications where adjacent components cannot serve as raceways.
4. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

Specification:

Bearing No.: TC1018+2TRA

Needle Roller Material: Chromium Steel (GCr15)

Cage Material: ST14 Steel

Bore Diameter (d): 5/8" / 15.88mm

Outside Diameter (D): 1-1/8" / 28.6mm

Bearing Thickness (T1): 5/64" / 1.984mm

Washer Thickness (T2): 0.8mm

Total Thickness: 3.584mm

Dynamic Load Capacity (Cr): 7072N

Static Load Capacity (Cor): 22551N

Maximum Rotational Speed (Oil): 16000rpm

Number of Pack: 2 Pcs