Pneumatic Push to Connect Tube Fittings Elbow 12mm Tube OD x 1/2PT Female

Product Features:
Color : Golden Tone, White
Material : Brass, Plastic
Thread Size : 1/2 PT
Tube Size (OD) : 12mm / 15/32"
Type: Elbow Female Thread Connector
Operating Pressure : 0-1MPa
Operating temperature：0 - 60 Degree Celsius
Dimension : 45mm x 45mm x 25mm / 1.77" x 1.77" x 0.98" (LxWxH)
 
Package Content:
1 x Push to Connect Fittings
 
Description:
1.The quick fitting is designed for Polyurethane or Nylon tubing. Even after installation, the direction of the tube can be changed freely.
2.Push-to-connect tube connection on one end and female PT threads on the other end.
3.A good release cap can withstand greater and stronger pressure without tripping.
4.Have abrasion resistance, light weight, and resistance to crushing and cracking,Compressive and corrosion resistant, good sealing performance and long service life.
5.Elliptical release ring help to connect tube easily by manual, no special tools required.
6.Outside (and Inside where applicable) hexagonal wrench tightening.
 
Mounted:
1.Cut the pipe flat, no slope
2.When inserting the pipe into the joint, it must be inserted into the end, otherwise there may be a leak.
3.After plugging in, try to pull the tube, if you can't pull it out, it means it has been connected.
4.When loosening the tube, first confirm that there is no pressure in the tube, and then evenly press the end cap to the bottom.