Description:
-
Unique patent-pending arched bridge design eliminates the chance for additional damage. Other systems without our arched bridge design are known to actually add dents to a car.
-
adhesive system design guarantees dent removal without the messy, sticky residue other systems are known to leave behind.
-
Repairs dents in almost any place on any vehicle.
-
Easily removes dents from hail. Car doors, shopping carts and more without damaging the surface of your car.
How to use:
-
With a clean wet dents clean part;
-
The hot melt adhesive stick into the back from the hot melt glue gun, pull the trigger, so stick into the glue gun, connect in the power, so glue warm 5 minutes;
-
To find a suitable traction pads (large indentation need to use large traction pads; (Note: the greater the traction pads, traction pulling the greater);
-
pull the trigger, coated with the choice of extrusion coated rubber gasket (gasket 4 holes should also be coated with hot melt adhesive
-
Quickly coated with hot melt adhesive traction pads on the dents in the central position, gently press until hot melt adhesive curing; (let hot melt glue dry for about 8 minutes; we recommend not to let heat Melt the time not to dry for more than 10 minutes)
- The traction tension bridge in the middle of the holes aligned with the traction of the gasket lever, the screw rotating set of sets in the traction pad gasket lever, slowly tighten until the dent part of the pull to the same surface flush with the surrounding
- Note: The power cord for the glue gun in the kit has an European power plug. It cannot be used in the United States.
Manufacturer Part Number | Does Not Apply |
Brand | Uxcell |
marketplaceId | EBAY_MOTORS |
Product Name | Dent Ding Repair Kit |
Material | Plastic & Metal & Rubber |
Package Content | 1 x Dent Ding Repair Kit |
Shell Color | White,Black |
Gule Gun Size | 15.5 x 13 x 2.5cm/6.1" x 5.1" x 1"(L*W*H) |
Gule Sticks | 1.1 x 17.3cm/0.4" x 6.8"(Max.D*L) |
Gule Pad And Stam Hole | 6mm/0.24" |
Konckdown Tool Size | 0.8 x 7cm/0.3" x 2.8"(Max.D*L) |
Pulling Bridge And Knob | 23 x 5.5 x 2cm/9.1" x 2.2" x 0.8"(L*W*H) |