Digital Voltage Tester, Multifunction Contact Induction Test Pen 12-220V

Voltage Reading Display Instructions:

1.Display 12, indicating voltage between 9V-12V

2.Display 12-36, indicating voltage between 12V-36V

3.Display 12-36-55, indicating voltage between 36V-55V

4.Display 12-36-110, indicating voltage between 55V-110V

5.Display 12-36-110-220, indicating voltage above 220V

Specification:

Product Name : Digital Voltage Tester

Voltage : 12-200V

Total Size : 142 x 25 x 18mm/5.59 x 0.98 x 0.71inch(L*W*H)

Slot Head Width : 3.5mm/0.14inch

Package Content :

1 x Digital Voltage Tester

Description:

Operating Instructions: Before use check the tester is functioning correctly by testing on a known live circuit.Always hold the plastic handle.Never touch the uninsulated end of the tester.

1.Testing for mains power(AC Voltage): Probe the live metal contact(wire or terminal)with screwdriver end.Touch the direct test button and the voltage level will be indicated on the digital display on a rising scale : 12V,36V,55V,110V,220V.

2.Testing for a line break: Hold the screwdriver end of the tester against the insulation of the cable and touch the induction breakpoint test button.The symbol will be indicated on the display if the cable is live.Run the tester along the cable until the symbol disappears.This is the point at where the cable may be broken.

3.Checking for earth: To check an appliance has a satisfactory earth connection it must first be plugged into the electrical supply.Touch a metal area on the appliance with the screwdriver end of the voltage tester.If the appliance is earthed satisfactorily there should be no indication on the display.An earth fault will produce the symbol.