Description:
Push Pull Type, linear motion, plunger spring return, DC solenoid electromagnet.
Support DC 12V voltage, high power, push type, linear motion, is easy to install.
DC solenoid electromagnet mainly used in vending machines, transport equipment, office facility, household appliance, mechanical, etc.
Initial pulling force is 5N
Specification:
Model: XRN-36x70;Main Color: Silver Tone
Material: Metal;
Net Weight: 495g
Type: Push Pull Type
Rated Voltage: DC 12V;
Travel: 16mm
Initial pulling force: 5N.
Cable Length: 250mm/9.84";
Total Length: 14cm/5.51";
Thread Dia: M18;
Plunger Bar Dia: 4mm/0.16"
Size: 36 x 70mm/1.42" x 2.76"(D*L)
Package Content:
1 x DC Solenoid Electromagnet
Note:
Please pay attention:As an actuating element of anmation equipment ,because the current is large, the single cycle can not be electrified for a long time.The best operate time is in 2 seconds.If the operate time is too long,the electromagnet temperature will rise.Too high temperature will burn down the coil and defect the electromagnet. Please ensure that the surface temperature of the electromagnet is not more than 75 degrees.
Please take the electromagnet put down gently when you install it. The screw thread can make a corresponding change according to your demand. This product is small in size, please pay attention to in the process of using eelectricity, so as not to damage the electromagnet.
MPN | Does Not Apply |
Brand | Uxcell |
Net Weight | 0.495 |