Home >>
Car Fuel Injector MR988406 HDA305E DC 12V for Mitsubishi Lancer Ralliart 2004
Description:
- Direct replacement of your old injector and no modification needed.
- Made of metal and plastic material which is durable and can use for a long time.
- The high impedance fuel injector has been tested and exactly matches the internal coil resistance and fuel flow rate of OEM fuel injector.
- O-Rings Included: Yes, preinstalled
- Orifice Type: 12 Holes Disc
- Color: Green
- Material: Metal, Plastic
- Manufacture Part Number: MR988406, HDA305E
- Voltage: DC 12V
- Pin Number: 2
- Size: 48x32x19mm / 1.89"x1.26"x0.75"(L*W*H)
- This installation should be done by an experienced mechanic who has access to a factory service manual and all required tools!
- Please check the fitment section of this listing before you bid.
- Please kindly check again your engine volume!
- This is a non-OEM product, accessory only!
- for Mitsubishi Lancer Ralliart Sedan 4-Door 2.4L 2400CC l4 GAS SOHC Naturally Aspirated 2004
- 1 x Fuel Injector
- Step 1. Make sure the engine is cool down. Disconnect the battery.
- Step 2. Remove the bolts and brackets from the fuel rail.
- Step 3. Disconnect the plug on each injector.
- Step 4. Lift the fuel rail and remove the injector from the fuel rail.
- Step 5. Press the new injector into the rail. Reattach the fuel rail and put the injectors in their respective holes.
- Step 6. Bolt down fuel rail. Reattach fuel line. Plug in injector connectors. Reconnect battery.
- Step 7. Double check for fuel leaks before and after starting the engine.