Home >>
8pcs Fuel Injector for Ford F-150 E-250 E-350 Expedition for Mustang for Lincoln Navigator Town Car for Mercury Grand Marquis 4.6L 5.0L 5.4
Specification:
for Ford F-150 4.6L 1997-2002
for Ford F-150 5.0L 1990-1996
for Ford F-150 5.4L 1998-2003
for Ford E-150 5.4L 2003
for Ford E-150 Club Wagon 5.4L 2003
for Ford E-150 Econoline 4.6L 1997-2002
for Ford E-150 Econoline 5.0L 1990-1996
for Ford E-150 Econoline 5.4L 1998
for Ford E-150 Econoline 5.4L 1997-2002
for Ford E-150 Econoline Club Wagon 4.6L 1997-2002
for Ford E-150 Econoline Club Wagon 5.0L 1990-1996
for Ford E-150 Econoline Club Wagon 5.4L 1997-2002
for Mercury Grand Marquis 4.6L 1992-1997
Package Included:
- O-Rings Included: Yes, preinstalled
- Orifice Type: 4 Holes Disc
- Voltage: DC 12V
- Material: Metal, Plastic
- Color: Black, Orange
- OE Number: 0280150943,FOTE-D5B,FOTZ-9F593-C,CM-4718
- Pin Number: 2
- Size: 73x26mm / 2.87"x1.02"(L*W)
- Flow Rate at 43.5psi/3 bar, 20Lb/hr, 151G/min, 210cc/min
- This installation should be done by an experienced mechanic who has access to a factory service manual and all required tools!
- Please kindly check again your engine volume!
- This is a non-OEM product, accessory only!
for Ford F-150 4.6L 1997-2002
for Ford F-150 5.0L 1990-1996
for Ford F-150 5.4L 1998-2003
for Ford E-150 5.4L 2003
for Ford E-150 Club Wagon 5.4L 2003
for Ford E-150 Econoline 4.6L 1997-2002
for Ford E-150 Econoline 5.0L 1990-1996
for Ford E-150 Econoline 5.4L 1998
for Ford E-150 Econoline 5.4L 1997-2002
for Ford E-150 Econoline Club Wagon 4.6L 1997-2002
for Ford E-150 Econoline Club Wagon 5.0L 1990-1996
for Ford E-150 Econoline Club Wagon 5.4L 1997-2002
for Mercury Grand Marquis 4.6L 1992-1997
Package Included:
- 8 x Fuel Injector
- Step 1. Make sure the engine is cool down. Disconnect the battery.
- Step 2. Remove the bolts and brackets from the fuel rail.
- Step 3. Disconnect the plug on each injector.
- Step 4. Lift the fuel rail and remove the injector from the fuel rail.
- Step 5. Press the new injector into the rail. Reattach the fuel rail and put the injectors in their respective holes.
- Step 6. Bolt down fuel rail. Reattach fuel line. Plug in injector connectors. Reconnect battery.
- Step 7. Double check for fuel leaks before and after starting the engine.