420cc 4 Holes Fuel Injector Replacement for 04-08 Mazda RX-8 195500-4450

Description:

• Direct replacement of your old injector and no modification needed.
• Made of metal and plastic material which is durable.
• The high impedance fuel injector has been tested and exactly matches the internal coil resistance and fuel flow rate of OEM fuel injector.

Specification:
O-Rings Included: Yes, preinstalled
Orifice Type: 4 Holes Disc
Material: Metal, Plastic
Color: Black, Yellow
Voltage: DC 12V
OE Number: 195500-4450,297-0041,N3H3-13-250A
Pin Number: 2
Total Length: 73mm / 2.87"
 Static Flow Rate: 420cc/min
High temperature resistant: -100° to 200°
Amperage: 1.0A
O-ring to O-ring Length: 67mm / 2.64"
O-Ring Diameter: 11mm / 0.43"
Diameter: 16mm / 0.63"
Flow Rate at 43.5psi/3 bar, 40.5Lb/hr, 305.6G/min, 425cc/min
Note:

• Please kindly check again your engine volume!
• This installation should be done by an experienced mechanic who has access to a factory service manual and all required tools!
• This is a non-OEM product, accessory only!

Fitment:

• for Mazda RX-8 1.3L 2004 2005 2006 2007 2008

Package Included:

• 1 x Fuel Injector

Installation:

• Step 1. Make sure the engine is cool down. Disconnect the battery.
• Step 2. Remove the bolts and brackets from the fuel rail.
• Step 3. Disconnect the plug on each injector.
• Step 4. Lift the fuel rail and remove the injector from the fuel rail.
• Step 5. Press the new injector into the rail. Reattach the fuel rail and put the injectors in their respective holes.
• Step 6. Bolt down fuel rail. Reattach fuel line. Plug in injector connectors. Reconnect battery.
• Step 7. Double check for fuel leaks before and after starting the engine.