Home >>
3/4" Cutting Dia 1/2" Steel Shank Carbide Tipped Cove Core Box Router Bit
Description:

- Made of steel and carbide material.
- Router Bit for industrial purpose, especially for chipboard(melamine board), glass fiber reinforced plastics(carbon fiber material), MDF, etc.
- Such bits are characterized with high hardness and long life and resulting in nice finishing on woody pieces after cutting. Compared with the similar products, ours are more than 2 times of theirs in life after strict testing.
- Use on hand held and table mounted woodworking engraving machine.
Tool maintenance:
- Keep tools clean after using them, remove resin, sawdust on the timber, using standard industrial solvent to clean the tool.
- Apply a small amount of oil can prevent the tool surface rust, clean up all the dirt of the shank to prevent slippage during use.
- Do not attempt to grind the tool or change the shape of the tool.
- When the tool is blunt, replace with a new tool, do not continue to use the tool in order to avoid breakage.
- Must use a suitable clamp(not included here). If the clamp is not round or worn, it will cause the clamp can not clamp the tool properly, please replace the clamp with standard specification immediately to prevent dangerous situation such as handle shaking, flying off or twisted off when the tool is working at high speed.
- Come with a plastic case, please be careful when opening the case, this product has a sharp edge.

Size | D | H | R |
1/2"x3/4" | 19.05mm | 12mm | 9.52mm |
Brand | Uxcell |
MPN | Does Not Apply |
Standard | 1/2" x 2" |
Cutting Diameter | 50.8mm / 2" |
Overall Length | 75mm / 2-19/20" |
Cutting Depth | 28.5mm / 1-1/8" |
Cutting Radius | 25.4mm / 1" |
Manufacturer Part Number | Does Not Apply |
Max. Rotation Speed | 18,000 RPM |
Shank Diameter | 1/2" |
Product Name | Core Box Router Bit |
Package Content | 1 x Core Box Router Bit, 1 x Plastic Case |
Material | Carbide & Steel |
Weight | 200g |
Main Color | Blue,Silver Tone |
Variation Theme | Size |