Home >>
1.8"x8"x12" Vehicle Exhaust Flexible Pipe Tubing with Welding Extension Pipe
Description:
- These flexible exhaust pipes are intended for weld in installation in an exhaust system to isolate noise, relieve vibration, and reduce the stress on the pipes a stainless steel internal bellows for vibration isolation, an internal stainless steel braid to reduce noise, and whistling.
- Made by Stainless Steel, durable, and corrosion resisting.
- No instruction included.
- Material: Stainless Steel
- Color: Silver Tone
- Inner Diameter: 45mm / 1.8"
- Outer Diameter: 48mm / 1.89"
- Unwelded Length: 200mm / 8"
- Overall Length: 300mm / 12"
- First, remove the old exhaust flex pipe.
- Then place the free end of the new exhaust flex pipe on it and adjust the position of the muffler and downpipe until it is straight but without tension.
- Pass the bolt through the hole at the end of the exhaust flex pipe connected to the muffler flange. Tighten them to secure the pipe to the flange.
- Place a new clamp where the exhaust flex pipe meets the downpipe and tighten it. Retighten the bolts that secure the muffler and downpipe.
- Please allow 1-2mm error due to manual measurement.
- 1 x Car Exhaust Flex Pipe
| Brand | X AUTOHAUX |
| Items Included | Pipe |
| Type | Flex Pipe |
| Material | Stainless Steel |
| Color | Silver Tone |
| Placement on Vehicle | Lower |
| Manufacturer Part Number | Does Not Apply |
| Universal Fitment | Yes |
| Inner Diameter | 45mm / 1.8" |
| Outer Diameter | 48mm / 1.89" |
| Overall Length | 300mm / 12" |
| Unwelded Length | 200mm / 8" |
| Product Name | Car Exhaust Flex Pipe |
| Shell Color | Silver Tone |
| Package Content | 1 x Car Exhaust Flex Pipe |
| marketplaceId | EBAY_MOTORS |
Customer Reviews
- Average Customer Review (0 customer reviews)
- 5
- (0)
- (0)
- (0)
- (0)
- (0)
