10PCS Deep Groove Ball Bearing 636Z Single Shield 6x22x7mm Chrome Steel Bearing

NOTE：

Please refer to the picture and select right type of bearings before your order (Sealed or Shield on BOTH or SINGLE side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product.

Description:

• Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions.
• Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on.
• With small friction and high-limit speed, Deep Groove Ball Bearings are cost-effective and require little maintenance.
• Chromium Steel (GCr15) made with heat treating, provides high and uniform hardness, good wear resistance.
• Single-row, pre-lubricated, normal accuracy.

Selection Guide:

Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris.

Sealed (Designation SuffixRS/2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings.

Specification:

Model: 636Z

Shield Type: Single Shield

Cage Material: Stamping Steel

Number of Pack: 10 Pcs

Inner Diameter (d): 6mm

Outer Diameter (D): 22mm

Thickness (B): 7mm

Dynamic Load Rating (Cr): 3.3kN

Static Load Rating (Cor): 1.35kN

Accuracy Class: P0 (ABEC1)

Noise Level: Z2

Weight: 126g