100W 4 Ohm Screw Tap Mounted Aluminum Housed Wirewound Resistors 2 Pcs

Specification:

Product Name	Aluminum Housed Resistor
Resistance Value	4 Ω
Power Rating	100W
Resistance Tolerance	+/- 5% (J)
Body Size	60 x 15mm/ 2.4" x 0.59" (L*D)
Mounted Hole Size	1.8mm/ 0.07", 3mm/ 0.12"
Total Size	85 x 21 x 15mm/ 3.3" x 0.83" x 0.59" (L*W*T)
Casing Material	Aluminum
Color	Green
Weight	60g
Package Content	2 x Aluminum Housed Resistor

Description:

Aluminum housing for heat dissipation, suitable for cooling plate installation.

Small size, high power load, standard and non-inductive winding types.

High insulating capacity, good performance in vibration.

Multiple connection modes, easy to install.

Widely used in power supply, transducer, elevator and high requirement equipment industry. Note: For longer service life, the actual load power connected to this product should be less than 70% of the rated power.

Suggestion:
a. The load resistor will get huge hot, please don't touch it when the resistor is working.Because aluminum resistor is a braking device which transfers Electric energy to Thermal energy.This is a normal physical phenomenon.
b. The load resistor should be mounted on metal board.
c. We recommend a 30%-50% increase in rated power based on your actual load power and add a heat sink device when it is necessary.

• If you choose a 30% increase in rated power, you must add a heat sink device.
• If you choose a 50% increase in rated power, you can add a heat sink device for the best use of its performance.

d. Not recommend to use it for Automotive repair or refit unless you have professional knowledge.

MPN	Does Not Apply
Brand	Uxcell
Sales Person Name	yujinping