Home >>
Car Fuel Injector 16600-41B00 16600-93Y00 A46-H02 DC 12V for Nissan March K11 1992-2003
Description:
- Direct replacement of your old injector and no modification needed.
- Made of metal and plastic material which is durable and can use for a long time.
- The high impedance fuel injector has been tested and exactly matches the internal coil resistance and fuel flow rate of OEM fuel injector.
- O-Rings Included: Yes, preinstalled
- Orifice Type: 4 Holes Disc
- Color: Gray
- Material: Metal, Plastic
- Manufacture Part Number: 16600-41B00, 16600-93Y00, A46-H02
- Voltage: DC 12V
- Pin Number: 2
- Size: 67x26mm / 2.64"x1.02"(L*Max.D)
- This installation should be done by an experienced mechanic who has access to a factory service manual and all required tools!
- Please check the fitment section of this listing before you bid.
- Please kindly check again your engine volume!
- This is a non-OEM product, accessory only!
- for Nissan March K11 1992-2003
- 1 x Fuel Injector
- Step 1. Make sure the engine is cool down. Disconnect the battery.
- Step 2. Remove the bolts and brackets from the fuel rail.
- Step 3. Disconnect the plug on each injector.
- Step 4. Lift the fuel rail and remove the injector from the fuel rail.
- Step 5. Press the new injector into the rail. Reattach the fuel rail and put the injectors in their respective holes.
- Step 6. Bolt down fuel rail. Reattach fuel line. Plug in injector connectors. Reconnect battery.
- Step 7. Double check for fuel leaks before and after starting the engine.