Home >>
Red Car Rubber Shock Absorber Spring Type-D Bumper Buffer Power Cushion 2pcs
Description:
- Using buffer principle, damping performance has improved significantly, damping effect can make the comfort up a notch.
- Non-bumpy asphalt road through a sharp turn, significantly improved stability.
- Restraint during the uneven pavement cars with shock to the body, thereby reducing the vibration noise of cars.
- An appropriate increase in body height, road barriers by improving vehicle performance.
- Protection damper suspension system, extend the life of automobile shock absorber, damping spring seal to prevent damage due to excessive turbulence intensity caused.
- Buffer suspension theory is that the power Cushion buffer to effectively reduce shock power.
- The noise is effectively absorbed by suspension system.
- The buffer can make a extension of the life of suspension system.
- Installation is easy, No need to change any part of the vehicle.
- If the spring has been weak(bearing slightly heavier body is very low)Install rubber buffer.Can the auxiliary spring, relatively improve the body,improve the bearing capacity.
- If often run rough road (turbulence when the instantaneous pressure tends to make the suspension system damage)Install rubber buffer. Can enhance the damping effect, absorption transient pressure,protective dampers and suspension system.
- If often carrying heavy(damper and suspension system is more easy to aging)Install rubber buffer. Through the shock absorption, protection of dampers and suspension system, prolong the service life of the damping system.
- If the shock effect (no comfort, no fun)Install rubber buffer.To improve the damping effect, enhance driving comfort, enjoy the driving pleasure.
- Park the car on a flat surface.
- Empty the car for measurement.
- Prepare a paper card for easy measurement.
- Find the spring position and measure the spare part of the middle part of the spring.
- Insert the paper card into the middle of the spring, and the height of the paper card is just right.
- Take out the paper card and measure the height of the paper card with the ruler. Tell the measure height to the customer service, and the customer service will provide the suitable model for you.
- 2 x Car Buffer Power Cushion
Product Name | Car Buffer Power Cushion |
Material | Rubber |
Package Content | 2 x Car Buffer Power Cushion |
Shell Color | Red |
Dimension | 11 x 4.6cm/ 4.3 x 1.8inches(D*T) |
Spring Clearance | 23mm/ 0.9inches |
Buffer Power Cushion Inner Dia | 7cm/ 2.8inches |
Manufacturer Part Number | Does Not Apply |
Brand | Uxcell |
marketplaceId | EBAY_MOTORS |