SMR115C-2OS Hybrid Ceramic Ball Bearing 5x11x4mm ABEC-7 Stainless Steel Bearings

NOTE：

Please refer to the picture and select right type of bearings before your order (Sealed or Shield on BOTH or SINGLE side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product.

Description:

• Single-row, pre-lubricated, high accuracy.
• Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions.
• The limit speed of hybrid ceramic ball bearing can reach more than 1.3 times of chrome steel bearing of the same model.
• Hybrid bearing features stronger rust and corrosion resistance ability to withstand destruction caused by humidity and some other media.
• Suitable for work in high temperature environment and would not harm by magnetism or electricity.
• Suitable for all kinds of industrial equipment, micro motor, engine and fishing reel.

Selection Guide:

Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris.

Sealed (Designation SuffixRS/2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings.

Specification:

Model:SMR115C-2OS

Seal Type: Double Sealed

Inner Race/Outer Race Material: 440C Stainless Steel

Ball Material: Ceramic

Inner Diameter (d): 5mm

Outer Diameter (D): 11mm

Thickness (B): 4mm

Dynamic Load Rating (Cr): 0.716kN

Static Load Rating (Cor): 0.282kN

Accuracy Class: P4 (ABEC-7)

Noise Level: Z1

Number of Pack: 1 Pcs