Pulse Solenoid Valve DC3.6V Quick Connection Thread Valves with Filter

Specification:

Positive Pulse: Opening valve

Negative Pulse: Closing Valve

Voltage: DC3.6V

Wire Length: 180mm/7.1"

Working Pressure: 0.02-1.0MPa

Total Size: 50mm x 48mm x 24mm (L*W*H)

Flow Direction: Unidirectional (Follow the Arrow on Valve Body)

Install and Use Attentions:

1. The water solenoid valve selects the corresponding voltage and temperature according to the actual situation when selecting the type.

2. When installing the solenoid valve, medium flow direction must be consistent with the direction arrow as shown in the valve body, the valve must be installed in horizontal pipe runs. Solenoid valve coil keep in a vertical position, the valve can not be put in places with splashing water or water leakage.

3. Please install a filter screen at the inlet end to avoid inhalation so that the solenoid valve can not be reset, resulting in water closes or obstructed opening.

4. If the solenoid valve is closed or blocked, please open the top four screws to clean the inner.

5. Before installing the solenoid valve, the pipeline should be cleaned.

Package Included:

1 x Pulse Solenoid Valve