|
This is a bi-direction adapter for serial and parallel ATA conversion. It includes the Serial ATA PHY,Link,Transport and Parallel ATA controller. The Serial ATA physical, link and transport layer are compliant to Serial ATA 1.0. This converter supports a 1.5GHz data rate.
Features: - SATA to IDE Adapter with LED indicated power and switch
- Easy to install and no driver is required
- Serial ATA 1.0 Specification Compliant
- Automatic Serial ATA 1.5 Gbps Speed Negotiation
- ATA/ATAPI LBA48 addressing mode associated with 2-byte sector count
- IDE to SATA Adapter support Serial ATA hot-plug
- Ultra Low power consumption
- SATA to IDE Converter works for both AC and DC couple between the transmitter and receiver
- IDE to SATA Converter provide specified OOB signal detection and transmission
- Support spread spectrum clocking to reduce EMI
- Support partial/slumber power management
- Provide adjustable TX signal amplitude and pre-emphasis level
- Weight: 97.8g
Package contents: - 1 x IDE to SATA or SATA to IDE Bilateral Converter Adapter
- 1 x Power cable
- 1 x SATA cable
- 1 x manual
This product was added to our catalog onWednesday 28 May, 2008
|