Home >>
Diamond Drill Bit Set Glass Tile Core Drill Bit Hole Saw 3Pcs (42mm 45mm 50mm)
Descriptions:
1. Smooth and exact finish can lower incision resistance, drill pressure, and increase the sharpness, effectiveness of water lubrication.
2. Nickel plating on the bits maximizes tool’s life with good resistance to corrosion. Excellent for making clean and precise holes on glass or ceramic and extending drill bits life.
3. Diamond drill bits with clearance hole facilitate the entrance of cooling water and escape of chips and other particles from drilling. Makes drilling process easier.
4. Suitable for processing Stone, Tiles, Ceramics, Glass and Granite, etc.. Works better with a electric drill (Not included here).
Specifications:
Drilling Diameter(D): 42mm /1.65", 45mm / 1.77", 50mm / 2.0"
Shank Diameter(d): 10mm / 0.4"
Drilling Depth(S): 30mm / 1.18"
Overall Length(L): 55mm / 2.17"
Material: Diamond, Carbon Steel
Features: Electroplated Diamond
Finish: Nickel Plating
Package: 1 Set (3 Pcs) x Diamond Drill Bits
Use Note:
1. Start your hole diagonally, make a round trace and then hold drill straight.
2. Please always use lubrication (water) when drill bits are working.
3. Low drill pressure and increased use of water lubrication will extend drill bit life.
4. Not suited for use on concrete or for depths beyond about 1/2 inch.
1. Smooth and exact finish can lower incision resistance, drill pressure, and increase the sharpness, effectiveness of water lubrication.
2. Nickel plating on the bits maximizes tool’s life with good resistance to corrosion. Excellent for making clean and precise holes on glass or ceramic and extending drill bits life.
3. Diamond drill bits with clearance hole facilitate the entrance of cooling water and escape of chips and other particles from drilling. Makes drilling process easier.
4. Suitable for processing Stone, Tiles, Ceramics, Glass and Granite, etc.. Works better with a electric drill (Not included here).
Specifications:
Drilling Diameter(D): 42mm /1.65", 45mm / 1.77", 50mm / 2.0"
Shank Diameter(d): 10mm / 0.4"
Drilling Depth(S): 30mm / 1.18"
Overall Length(L): 55mm / 2.17"
Material: Diamond, Carbon Steel
Features: Electroplated Diamond
Finish: Nickel Plating
Package: 1 Set (3 Pcs) x Diamond Drill Bits
Use Note:
1. Start your hole diagonally, make a round trace and then hold drill straight.
2. Please always use lubrication (water) when drill bits are working.
3. Low drill pressure and increased use of water lubrication will extend drill bit life.
4. Not suited for use on concrete or for depths beyond about 1/2 inch.
MPN | Does Not Apply |
Type | Core Drill Bit |
Brand | uxcell |