DC 24V 400mA 9.6W Force 1.8N 10mm Pull Type Linear Motion Solenoid Electromagnet

Description:

1.Pull Type, linear motion, plunger spring return, DC solenoid electromagnet.

2.Support DC 24V voltage, high power, pull type, linear motion, is easy to install.

3.DC solenoid electromagnet mainly used in vending machines, transport equipment, office facility, household appliance, mechanical, etc.

 Specification:

Initial Pulling Force:1.8N(10mm);
Holding Force: 25N( 0mm );
Travel: 10mm
Rated Voltage: DC 24V ;
Current: 400mA;
Power: 9.6W;
Cable Length: 180mm/7.09";
Push Bar Dia: 10mm/0.39";
Total Length: 70mm/2.76";
Mounting Hole Dia.: M3
Size: 40 x 24 x 29mm/1.57" x 0.94" x 1.14"(L*W*H)

Package Content: 
1 x DC Solenoid Electromagnet

Note:

Please pay attention:As an actuating element of an automation equipment ,because the current is large, the single cycle can not be electrified for a long time.The best operate time is in 2 seconds.If the operate time is too long,the electromagnet temperature will rise.Too high temperature can affect the life of the electromagnet.

Please take the electromagnet put down gently when you install it. The screw thread can make a corresponding change according to your demand. This product is small in size, please pay attention to in the process of using eelectricity, so as not to damage the electromagnet.

MPN	Does Not Apply
Brand	Uxcell
Travel	10mm
Total Length	70mm/2.76"
Cable Length	180mm/7.09"
Push Bar Dia	10mm/0.39"
Power	9.6W
Type	Pull Type
Mounting Hole Dia.	M3
Rated Voltage	DC 24V
Current	400mA
Size	40 x 24 x 29mm/1.57" x 0.94" x 1.14"(L*W*H)
Holding Force:	25N
Initial Pulling Force	1.8N
Country of Manufacture	CHINA
Model	JF-1040
Main Color	Silver Tone,Blue
Material	Metal
Net Weight	137g
Package Content	1 x DC Solenoid Electromagnet