Note:
Please pay attention:As an actuating element of an automation equipment ,because the current is large, the single cycle can not be electrified for a long time.The best operate time is in 2 seconds.If the operate time is too long,the electromagnet temperature will rise.Too high temperature can affect the life of the electromagnet(If the temperature of the electromagnet is too high, it should shorten the power-on time and prolong the power-off time).
Please take the electromagnet put down gently when you install it. The screw thread can make a corresponding change according to your demand. This product is small in size, please pay attention to in the process of using electricity, so as not to damage the electromagnet.
Description:
- Pull type, linear motion, open frame, plunger spring return, DC solenoid electronmagnet.
- DC Solemoid Electromagnet mainly used in vending machines, transport equipment, office facility household appliance, mechanical, etc.
- Solenoids of this category work externally through pulling pushing in plunger.
- When energized, doing work through pulling pushing in plunger joined object.
MPN | Does Not Apply |
Country of Manufacture | CHINA |
Material | Metal & Electronic Parts |
Net Weight | 86g |
Package Content | 1 x DC Solenoid Electromagnet |
Brand | Uxcell |
Model | 0841S34A08 |
Main Color | Silver Tone,Blue |
Battery Included | No |
Rated Voltage Current | DC 24V 3A |
Stroke | 8mm |
Force | 800g |
Power | 72W |
Body Size | 41 x 19 x 22mm/1.6" x 0.75" x 0.83"(L*W*H) |
Plunger Size | 86 x 8mm/3.4" x 0.3"(L*D) |
Cable Length | 11cm/4.3" |