Home >>
Car Fuel Injector 23250-0T010 23209-0T010 DC 12V for Scion XD 2008-2009
Description:
- Direct replacement of your old injector and no modification needed.
- Made of metal and plastic material which is durable and can use for a long time.
- The high impedance fuel injector has been tested and exactly matches the internal coil resistance and fuel flow rate of OEM fuel injector.
- O-Rings Included: Yes, preinstalled
- Orifice Type: 12 Holes Disc
- Material: Metal, Plastic
- Color: Brown
- Voltage: DC 12V
- OE Number: 23250-0T010, 23209-0T010
- Pin Number: 2
- Size: 91x32x19mm / 3.58"x1.26"x0.75"(L*W*H)
- Please check the fitment section of this listing before you bid.
- Please kindly check again your engine volume!
- This is a non-OEM product, accessory only!
- for Scion xD Base 1.8L L4 - Gas 2008-2009
- for Toyota Corolla 1.8L L4 - Gas 2014-2016
- 1 x Fuel Injector
- This installation should be done by an experienced mechanic who has access to a factory service manual and all required tools!
- Step 1. Make sure the engine is cool down. Disconnect the battery.
- Step 2. Remove the bolts and brackets from the fuel rail.
- Step 3. Disconnect the plug on each injector.
- Step 4. Lift the fuel rail and remove the injector from the fuel rail.
- Step 5. Press the new injector into the rail. Reattach the fuel rail and put the injectors in their respective holes.
- Step 6. Bolt down fuel rail. Reattach fuel line. Plug in injector connectors. Reconnect battery.
- Step 7. Double check for fuel leaks before and after starting the engine.