Home >>
Car Flow Matched Fuel Injector Nozzle H8200778880 for OPEL VIVARO
Description:
- Direct replacement of your old injector.
- Made of metal and plastic material which is durable and can use for a long time.
- The high impedance fuel injector has been tested and exactly matches the internal coil resistance and fuel flow rate of OEM fuel injector.
- O-Rings Included: Yes, preinstalled
- Orifice Type: 1 Hole Disc
- Material: Metal, Plastic
- Color: Gray, Silver Tone
- Manufacture Part Number: H8200778880
- Voltage: DC 12V
- Pin Number: 2
- Size: 102x44x25mm / 4.02"x1.73"x0.98"(L*W*H)
- This installation should be done by an experienced mechanic who has access to a factory manual and all required tools!
- This is a non-OEM product, accessory only!
- for OPEL VIVARO -12 2012 2.0 CDTI 6V 4D 2.0 CDTI 6V 4DR SKP DIESEL
- for OPEL VIVARO -11 2011
- for OPEL 2.0D R4 114HK M73 5DR BUS DIESEL COLD START VALVE
- for OPEL VIVARO -12 2012 2 0 CDTI 2 0CDTI/M9R-692 6 VXL 2DR SKP DIESEL
- for PRIMASTAR -11 2011 4 2.0 DCI 6VXL 0DR SKP DIESEL
- 1 x Fuel Injector
- Step 1. Make sure the engine is cool down. Disconnect the battery.
- Step 2. Remove the bolts and brackets from the fuel rail.
- Step 3. Disconnect the plug on each injector.
- Step 4. Lift the fuel rail and remove the injector from the fuel rail.
- Step 5. Press the new injector into the rail. Reattach the fuel rail and put the injectors in their respective holes.
- Step 6. Bolt down fuel rail. Reattach fuel line. Plug in injector connectors. Reconnect battery.
- Step 7. Double check for fuel leaks before and after starting the engine.