Home >>
Truck Car Bike Inner Tube Portable Digital Tire Inflator Pressure Gauge Set 200 PSI with 90 Degree Tire Valve Extension Rod
Features:
- The air bleeder switch will adjust the air pressure when the tire pressure is too high.
- LCD display with backlight for easy reading, ergonomic control handle with valve.
- Four units for display reading range, displays KGF, BAR, PSI, KPA measurement.
- Portable size, equipped with rubber hose, can be moved in corners and other narrow spaces, easy to use.
- Perfect for most Car, Truck, Motorcycle and Bike.
- Material: Metal, Rubber, Plastic
- Color: Silver Tone, Black
- Voltage: DC 3.1V
- Operating Temperature: -20 to 60℃
- Measure Tire Pressures: 0 to 200psi
- Hose Length: 36cm / 14.17''
- Gauge Diameter: 6cm / 2.36''
- Guage Hole Diameter: 12mm / 0.47''
- Guage Size: 18x8x7.5cm / 7.09''x3.15''x2.95''(L*W*H)
- Air Chuck Size Inner Diameter: 8mm / 0.31''
- 90 Degree Tyre Valve Extension Rod Size: 4.3x2.8x1.2cm / 1.69''x1.1''x0.47''(L*W*H)
- Air Intake Nozzle Thread Diameter: M12x1.5
- Air Intake Nozzle Size: 1.5x3cm / 0.59''x1.18''(Max.D*H), 1.5x3.8cm / 0.59''x1.5''(Max.D*H)
- Tire Valve Cap Size: 12x10mm / 0.47''x0.39''(H*D)
- Rubber Gasket Size: 12x6x2mm / 0.47''x0.24''x0.08''(OD*ID*H)
- Thread Seal Tape Size: 12mmx0.075mmx10m(Width*Thickness*Length)
How to Use:
- Screw off the knot of tire valve.
- Fix the copper head of the gauge to the valve
- The device will show the pressure.
- You need to find an inflatable pump and gas pipe to connect the inflatable mouth and hold the handle of the product inflate it through the inflator, when pressure is low or vice versa.
- After the measurement, screw off the copper head and press to make the indicator to 0.
- 1 x Digital Tire Inflator
- 1 x Air Chuck
- 1 x 90 Degree Tyre Valve Extension Rod
- 1 x American Type Air Intake Nozzle
- 1 x Japanese Type Air Intake Nozzle
- 1 x Rubber Gasket
- 3 x Tire Valve Cap
- 1 x Valve Core Tool
- 1 x Thread Seal Tape
- 1 x Installation Note