Home >>
3pcs Black NBR70 Rubber O-Ring Washer Sealing Gasket for Car 40 x 2mm
Description:
- Used to prevent leaks while working with plumbing,hydraulics,air and gas connections.
- Rubber construction resists oil,gas,water and durable.
- Suitable for car engine system,transmission,shock absorber etc.
- Easy to store,light weight.
- Materials should be stored at a temperature of 0 to 28 degree centigrade,relative humidity of not more than 80%, dust-free and properly ventilated environment,at least 1 meter away from the heat source.
- Materials are not allowed to come into contact with acids,alkali,oils and various solvents during storage to avoid exposure to sunlight,arc light and others.
- Use tools without sharp edges.
- Ensure that the O-ring is not twisted,and do not stretch the O-ring too hard.
- Try to use an auxiliary tool to install O-ring,and ensure correct positioning.
- For bonding with a sealing strip,the O-ring must not be stretched at the joint.
- When the O-ring is stretched,the mounting mandrel must be used when passing screws, keyways, etc.The mandrel can be made of soft,smooth metal or plastic without glitch or sharp edges.
- When installing the compression screws,tighten the screws symmetrically and do not tighten them in the direction.
- Whether the angle is machined according to the drawing.Whether the sharp edge is chamfered or rounded.
- Whether the inner diameter removes the glitch surface or not.
- Whether the seals and parts have been greased or lubricated.
- 3 x Car O-Ring Seal Gasket
Inner Diameter | 40mm / 1.57" |
Wire Diameter | 2mm / 0.08" |
Manufacturer Part Number | Does Not Apply |
Brand | Uxcell |
marketplaceId | EBAY_MOTORS |
Outer Diameter | 44mm / 1.73" |
Oil Resistance Change for ASTM#1(Elongation Rate) | -21%(Test Condition:100 Celsius,70 Hours) |
Oil Resistance Change for ASTM#3(Hardness) | -1(Test Condition:100 Celsius,70 Hours) |
Oil Resistance Change for ASTM#3(Elongation Rate) | -18%(Test Condition:100 Celsius,70 Hours) |
Oil Resistance Change for ASTM#3(Tensile Strength) | 5%(Test Condition:100 Celsius,70 Hours) |
Brittle Temperature | -40 Celsius |
Tolerance Standard(Inner Diameter) | +/-0.33mm |
Tolerance Standard(Wire Diameter) | +/-0.07mm |
Hardness(Shore A) | 70 |
Tensile Strength(Mpa) | 18.5 |
Elongation Rate | 350% |
Hot Air Aging (Permanent Compression,Deformation) | 13%(Test Condition:100 Celsius,70 Hours) |
Hot Air Aging(Hardness Change ) | +2 Degrees(Test Condition:100 Celsius,70 Hours) |
Oil Resistance Change for ASTM#1(Hardness) | +8(Test Condition:100 Celsius,70 Hours) |
Oil Resistance Change for ASTM#1(Tensile Strength) | 8%(Test Condition:100 Celsius,70 Hours) |
Product Name | Car O-Ring Seal Gasket |
Net Weight | 0.003 |
Material | NBR70 |
Package Content | 3 x Car O-Ring Seal Gasket |
Shell Color | Black |