Home >>
3pcs AS568A Black FKM75 Rubber O-Ring Washer Sealing Gasket for Car 37.7x3.5mm
Features:
- Used to prevent leaks while working with plumbing, hydraulics, air and gas connections.
- Rubber construction resists oil, gas, water and durable.
- Suitable for Car Engine System, Transmission, Shock Absorber etc.
- Easy to store, light weight.
Storage Condition:
- Materials should be stored at a temperature of 0 to 28 degree centigrade, relative humidity of not more than 80%, dust-free and properly ventilated environment, at least 1 meter away from the heat source.
- Materials are not allowed to come into contact with acids,alkali,oils and various solvents during storage to avoid exposure to sunlight,arc light and other .
Installation:
- Use tools without sharp edges.
- Ensure that the O-ring is not twisted, and do not stretch the O-ring too hard.
- Try to use an auxiliary tool to install O-ring, and ensure correct positioning.
- When the O-ring is stretched, the mounting mandrel must be used when passing screws, keyways, etc.
- When installing the compression screws,tighten the screws symmetrically and do not tighten them in the direction.
Some Tips Before Installation:
Please Check:
Please Check:
- Whether the lead angle is machined according to the drawing.Whether the sharp edge is chamfered or rounded.
- Whether the inner diameter removes the glitch surface or not.
- Whether the seals and parts have been greased or lubricated.
Notes:
- Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated same.
Product Name | Car O-Ring Seal Gasket |
Net Weight | 8g |
Material | FKM75 |
Package Content | 3 x Car O-Ring Seal Gasket |
Shell Color | Black |
Inner Diameter | 37.7mm / 1.48" |
Wire Diameter | 3.5mm / 0.14" |
Standard | AS568A |
Hardness(Shore A) | 75 |
Tensile Strength(Mpa) | 12 |
Elongation Rate | 250% |
Hot Air Aging (Permanent Compression,Deformation) | 25%(Test Condition:175 Celsius,70 Hours) |
Hot Air Aging(Hardness Change ) | +2 Degrees(Test Condition:175 Celsius,70 Hours) |
Oil Resistance Change for ASTM#3(Hardness) | -4(Test Condition:200 Celsius,70 Hours) |
Oil Resistance Change for ASTM#3(Elongation Rate) | -18%(Test Condition:200 Celsius,70 Hours) |
Oil Resistance Change for ASTM#3(Tensile Strength) | -3%(Test Condition:200 Celsius,70 Hours) |
Brittle Temperature | -25 Celsius |
Outer Diameter | 44.8mm / 1.76" |
Manufacturer Part Number | Does Not Apply |
Brand | Uxcell |
marketplaceId | EBAY_MOTORS |
Tolerance Standard(Inner Diameter) | +/-0.30mm |
Tolerance Standard(Wire Diameter): | +/-0.10mm |